Search

In Stock

Human Heart, Pumping

Integrated mechanical pumping system simulates rhythmic cardiac contraction and relaxation.

Transparent flow pathways allow observation of directional blood movement during operation.

₹1,205.00

Quick Answer: The pumping heart model is a working model of the human heart used to demonstrate its action as a pump, rather than only its anatomy. It helps students see how contraction and one-way valves move blood out of the heart and into the arteries.

Demonstrating the Heart as a Pump

Static models teach names; a pumping heart model teaches function. Working heart models are commonly driven by a hand-squeezed bulb or a small pump that pushes coloured liquid, or air, through the chambers and vessels, showing flow leaving the heart with each squeeze.

The demonstration supports the key ideas of the cardiac cycle. During systole the ventricles contract and pressure rises until the semilunar valves are forced open and blood is ejected; during diastole the ventricles relax, those valves snap shut and the chambers refill from the atria. Without valves the heart would push blood backwards as much as forwards, and a working model makes that one-way principle visible.

It also links to measurements students can make on themselves. Each ejection sends a pressure wave along the arteries that is felt as the pulse, and the volume ejected per beat, the stroke volume, multiplied by the heart rate gives the cardiac output. Timing the model’s action alongside students’ own pulse rates makes these terms concrete.

Specifications

Type Working (pumping) model of the human heart
Demonstrates Pumping action and one-way flow through valves
Concepts Systole, diastole, pulse, stroke volume and cardiac output
Suited to Secondary biology, physiology and nursing lessons

Applications

  • Demonstrating systole and diastole in the cardiac cycle
  • Showing why valves are needed for one-way blood flow
  • Introducing pulse, heart rate and cardiac output before students measure their own
  • Exercise physiology lessons on how heart rate and stroke volume rise with activity

Care & Handling

  • If the pumping heart model uses liquid, empty and rinse it after each use and let it dry, to prevent mould in tubes and chambers.
  • Operate the pump gently; forcing it can split tubing or loosen joints.
  • Inspect flexible parts regularly and keep the model out of the sun, which hardens rubber and plastic tubing.

Why Choose LabEquip

Physiology teachers and nursing tutors buy a pumping heart when they want to show the heart working, not just its parts. LabEquip lists it with its biology lab products, and the static 2 part heart covers internal anatomy alongside it. Ask through the contact page how this model is operated.

Related Products

Frequently Asked Questions

What does a pumping heart model demonstrate that a static heart model cannot?

A static model teaches the names and positions of chambers and valves, while a working heart model shows function: contraction pushing blood out and one-way valves stopping it flowing back. Students see the heart as a pump, which makes ideas such as systole, diastole and the pulse much easier to grasp.

What is the difference between systole and diastole?

Systole is the contraction phase: the ventricles squeeze, pressure rises, the atrioventricular valves close and blood is pushed into the aorta and pulmonary trunk. Diastole is the relaxation phase: the ventricles relax, the semilunar valves close and the chambers refill from the atria. A pumping model lets students watch the two phases alternate.

How do one-way valves keep blood moving in one direction?

A heart valve opens only when the pressure behind it is higher than in front, and it closes when the pressure reverses. So when a ventricle contracts, the valve leading out opens while the valve leading in shuts, and when it relaxes the opposite happens. Watching the direction of flow on a pumping model makes this point clearly.

How is cardiac output worked out?

Cardiac output is the volume of blood the heart pumps each minute, calculated as stroke volume multiplied by heart rate. For example, 70 ml per beat at 70 beats per minute gives 4,900 ml, about 4.9 litres per minute. A pumping model helps students link each squeeze to a stroke volume and each squeeze count to a heart rate.

Why do we feel a pulse at the wrist?

Each time the left ventricle contracts, a surge of blood stretches the elastic wall of the aorta, and this pressure wave travels along the arteries faster than the blood itself. Where an artery lies near the surface over bone, as at the wrist, the wave can be felt as a pulse, one for each heartbeat.

What class activity pairs well with a pumping heart demonstration?

Measuring pulse rate at rest and after a minute of gentle exercise works well, because students can connect the faster beat they feel with the model’s pumping action. Recording the results in a table and calculating the change also gives practice in handling data. A digital heart rate monitor can replace counting by hand.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)