Quick Answer: A Displacement Vessel is a container with a side spout set below its rim, filled with water to spout level so that any solid lowered into it pushes out a volume of water equal to its own submerged volume. It is the standard piece for Archimedes’ principle, irregular-solid volume and density practicals.
Verifying Archimedes’ Principle
Archimedes’ principle states that a body wholly or partly immersed in a fluid experiences an upthrust equal to the weight of fluid it displaces. With a displacement vessel the statement can be checked directly. A solid such as a stone or metal block is hung from a spring balance and weighed in air, then lowered on its thread into the full vessel while the overflow runs into a weighed beaker. The loss in the balance reading is the upthrust; the weight of water collected should match it within the experimental error.
The same readings give the solid’s volume (the volume of water collected) and its density (mass in air divided by that volume), so one careful trial produces three results. Repeating with a second liquid, such as salt water, lets students show that upthrust depends on the density of the fluid as well as the size of the object.
Why a Spouted Vessel Instead of a Measuring Cylinder
A measuring cylinder works for a small pebble that fits inside it, but many specimens are wider than the cylinder’s mouth. The spouted vessel accepts larger, awkward shapes, and the collected water can then be measured in any cylinder. Its weak point is the spout: water clinging to the lip or still dripping when the reading is taken causes the commonest errors, so the vessel must be filled until it overflows and left until the drip stops before each trial.
Specifications
| Type | Overflow (displacement) vessel with side spout |
| Principle | Volume displaced equals volume of the immersed solid |
| Used with | Spring balance, thread, collecting beaker, measuring cylinder |
| Typical levels | Lower secondary to senior school physics |
| Material and capacity | Confirm at enquiry |
Practicals
- Verifying Archimedes’ principle by comparing upthrust with the weight of overflow
- Finding the volume and density of stones, metal pieces and other irregular solids
- Comparing the upthrust on one solid in water and in brine to find the relative density of the brine
- Introducing flotation: showing that a floating body displaces its own weight of water
Care & Handling
- Stand the vessel on a level bench so that the water surface settles at the same level each time.
- Lower solids slowly on a thread; dropping them splashes water out of the top and spoils the reading.
- Empty and dry the vessel after use, particularly if salt solutions were used, to prevent residue or corrosion around the spout.
- Check the spout for chips or deposits that could make the overflow stop at different levels.
Why Choose LabEquip
Schools generally buy one displacement vessel per practical group because it is used in several hydrostatics experiments through the year. LabEquip lists it with its mechanics lab equipment in Physics Equipments; the metal eureka can is a related option where a metal body is specifically wanted. Send material and quantity questions through the LabEquip contact page.
Frequently Asked Questions
How is a displacement vessel used to verify Archimedes’ principle?
Weigh a solid in air on a spring balance, lower it fully into the brim-full vessel and note the new reading. The loss in weight is the upthrust. Weigh the water that overflowed into a beaker; it should equal the upthrust.
How do I find the density of a stone with it?
Measure the stone’s mass on a balance, then lower it into the full vessel and measure the volume of water that overflows in a measuring cylinder. Density is the mass divided by that volume, in grams per cubic centimetre.
Can the vessel compare the densities of two liquids?
Yes. Find the upthrust on the same sinker in water and then in the second liquid. Because the sinker displaces the same volume each time, the ratio of the two upthrusts equals the relative density of the second liquid.
Why is a displacement vessel used instead of a measuring cylinder?
A measuring cylinder only works for objects that fit through its mouth and gives small level changes that are hard to read. The vessel accepts larger solids, and the overflow can be measured in a cylinder of suitable size.
Why should I wait for the spout to stop dripping?
The vessel is only truly full when water has stopped running from the spout. Starting while it is still dripping adds water that the solid did not displace, so the measured volume comes out too high.
What is the vessel made of?
Overflow vessels of this type are made in metal, clear plastic and glass. Clear vessels let students watch the water level, while metal ones resist knocks; the material of this listing can be confirmed when you order.
Last Updated: October 2026










Reviews
There are no reviews yet.