Search

In Stock

Cup Anemometer with Analog Display

Three-Cup Rotor Mechanism: Converts wind motion into proportional rotational speed for accurate airflow measurement.

Calibrated Analog Dial Indicator: Provides clear, real-time wind speed readings suitable for instructional and field use.

₹890.00

Quick Answer: The Cup Anemometer with Analog Display is a wind-speed instrument in which a rotor of cups spins about a vertical axis and the rotation is shown on a pointer or dial readout rather than a digital screen. It is used in geography fieldwork, school weather stations and physics lessons on wind and rotation.

Why the Cups Turn

A cup facing into the wind with its hollow side catches more air than a cup presenting its rounded back, because the drag on a concave surface is greater. With cups mounted on arms around a vertical spindle, the push on the open cups always outweighs the push on the backs, so the rotor spins whichever direction the wind comes from. Thomas Romney Robinson introduced the design in 1846, and cup rotors remain the usual sensor for wind speed at weather stations.

Over a wide range of speeds, the rate of rotation is close to proportional to the wind speed, so counting turns gives the speed once the instrument has been calibrated. The cups do not show direction; a wind vane is used alongside for that.

Reading an Analog Display

Analog cup anemometers show the result in one of two ways. A pointer instrument drives a needle across a speed scale, often through a small generator whose voltage rises with rotation speed, and gives an instant reading that swings with each gust. A counter type records the run of wind on dials, so the observer notes the counter at the start and end of a timed interval and divides the distance by the time to obtain the mean speed. The readout on this model and its scale units should be confirmed; either way, students learn to look for the steady value rather than the momentary peak.

Where It Is Used

  • School weather stations recording daily wind speed alongside temperature and rainfall
  • Geography fieldwork comparing exposed and sheltered sites, or microclimates around buildings
  • Estimating Beaufort force from measured wind speed
  • Physics lessons on rotation, drag and the link between speed and frequency

Specifications

Sensor Rotating cup rotor on a vertical spindle
Readout Analog: pointer scale or counter dial
Measures Wind speed (direction needs a separate vane)
Typical use Fieldwork and school weather stations
Readout type, scale units and mounting Confirm at enquiry

Care & Handling

  • Hold the cup anemometer at arm’s length above your head, or mount it on a pole, away from buildings and trees that shelter and distort the wind.
  • Never spin the cups by hand or blow into them hard; overspeeding can damage the bearings.
  • After use in rain, dry the cups and spindle before storage, and keep the instrument dust-free.
  • Check that the cups spin freely and that the pointer returns to zero before each session.

Why Choose LabEquip

Geography departments and schools setting up a weather corner often choose an analog anemometer because it can be read by a whole group at once. It is listed in LabEquip’s Physics Equipments; a digital-display version is available for direct numerical readouts. Ask about mounting and units via the contact page.

Frequently Asked Questions

Why does the anemometer work whatever the wind direction?

The rotor is symmetrical about its vertical spindle. Wind from any direction meets some cups open side on and others back on, and the larger drag on the open cups always turns the rotor the same way.

How do I find the mean wind speed with a counter-type dial?

Note the dial reading, start a stopwatch, and read the dial again after a set time such as two minutes. The difference is the run of wind; divide it by the time to obtain the average speed over that period.

Why does the pointer keep moving?

Wind is gusty, so its speed changes from second to second. Watch the pointer for a short period and record the typical value, and the highest value as well if gusts are being studied.

How high should the anemometer be held?

As high and as clear of obstacles as possible. Wind near the ground is slowed by friction and sheltered by walls and trees. Weather stations mount anemometers on tall masts for this reason, so school readings should always state the height used.

Can it measure wind direction?

No. A cup anemometer measures speed only. Use a wind vane or a compass with a streamer alongside it, and record direction as the point of the compass the wind is blowing from.

How does it compare with a digital anemometer?

An analog instrument is simple and easy for a group to read at once. A digital version shows the speed directly, often with averaging, but depends on batteries. Both rely on the same rotating-cup sensor.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)