Quick Answer: The Bar Magnet Re-Magnetization Device is a magnetiser for restoring laboratory bar magnets that have lost strength. A bar magnet re-magnetization device exposes the magnet to a strong field along its length, realigning its magnetic domains so the magnet works properly in practicals again.
Why Laboratory Magnets Weaken
A permanent magnet is strong because most of its tiny magnetic regions, called domains, point the same way. Rough treatment disturbs that alignment. Dropping a magnet on a hard floor, heating it, storing it loose with like poles together, or leaving it without keepers lets domains slip out of line, and the magnet grows weaker over the years. Steel and older alloy magnets are more prone to this than modern high-coercivity materials.
Re-magnetising reverses the damage. A field much stronger than the magnet’s own is applied along its axis, forcing the domains back into line; when the field is removed, most of them stay aligned.
How the Device Is Used
Magnetisers come in two common designs: a coil through which a strong direct current is passed for a moment with the magnet inside, and a permanent-magnet type with powerful pole pieces across which the bar is placed or drawn. Which design this device uses, and its operating instructions, should be confirmed before ordering. In either case, the poles of the weak magnet are identified first with a compass, then the magnet is placed so its north end goes to the side of the device that produces a north pole, otherwise its polarity is reversed.
Afterwards the magnet is checked, by the number of pins or clips it lifts or by the deflection it gives a compass needle at a fixed distance, and stored in a pair with keepers so it stays strong.
When It Is Needed
- Restoring bar magnets that no longer give useful compass deflections
- Re-magnetising magnets before deflection and vibration magnetometer practicals
- Correcting magnets whose poles have been weakened by poor storage
- Demonstrating magnetisation and domain theory to students
Specifications
| Function | Restores the strength of weakened bar magnets |
| Principle | Strong applied field realigns magnetic domains |
| Suitable for | Laboratory bar magnets used in school and college practicals |
| Check after use | Compass deflection or lifting test |
| Design (coil or permanent-magnet type) and supply | Confirm at enquiry |
Care & Handling
- Keep watches, phones, bank cards and other magnetic media well away from the device during use.
- If the device is electrically operated, follow its instructions and keep hands clear when it is energised.
- Mark the poles of each magnet before treatment so it is not accidentally reversed.
- Store treated magnets in pairs, unlike poles together, with soft-iron keepers across the ends.
Why Choose LabEquip
Departments with a stock of older bar magnets buy a magnetiser so the set can be restored instead of replaced. LabEquip supplies it with its physics equipment, alongside items such as the alnico bar magnet pair and the magnetizing and demagnetizing coil apparatus; details can be discussed through the contact page.
Frequently Asked Questions
Why do bar magnets lose their strength?
Their magnetic domains are knocked out of alignment by dropping, heating, or storage with like poles together and no keepers. Over time the magnet’s field weakens.
How does re-magnetising restore a magnet?
A field much stronger than the magnet’s own is applied along its length, forcing the domains back into line. Most of them remain aligned after the field is removed.
Can re-magnetising reverse the poles by mistake?
Yes, if the magnet is placed the wrong way round. Identify the north pole with a compass first and place it towards the side of the device that produces a north pole.
How can I check that the magnet is stronger afterwards?
Count the steel pins or paper clips it lifts before and after, or measure the compass deflection it gives at a fixed distance. A clear increase shows the treatment worked.
Which magnets benefit most from re-magnetising?
Steel and older alloy magnets lose strength most easily and recover well. Modern magnets with high coercivity rarely weaken in normal school use.
How should magnets be stored to stay strong?
In pairs with unlike poles side by side and soft-iron keepers across the ends, away from heat. Never store them loose in a drawer where they knock together.
Last Updated: October 2026










Reviews
There are no reviews yet.