Search

In Stock

SCALPEL 5” KNIFE HANDLE

Standard  5 handle design, compatible with commonly used dissection and surgical blades

Corrosion-resistant metal construction with balanced grip, ensuring durability and precise control

₹175.00

Quick Answer: The Scalpel 5” Knife Handle is a reusable 5 inch scalpel handle onto which detachable surgical blades are fitted, used for fine cutting in dissection practicals and specimen preparation. The handle stays in service for years while blades are changed as soon as they dull.

Handle and Blade System

Detachable-blade scalpels separate the parts that wear from the part that does not. The handle carries a slotted fitting near its tip; a blade with a matching keyhole slot slides onto it and locks in place. Blades are used until they lose their edge and are then discarded into a sharps container, so a class always cuts with a sharp edge without replacing the whole instrument.

Handles are made in numbered patterns, and the pattern decides which blades fit. The No. 3 family takes the smaller blades, such as numbers 10, 11, 12 and 15, while the No. 4 family takes the larger blades, numbers 20 to 24. A 5 inch handle is a compact length that gives good control for small specimens; its fitting pattern should be confirmed so the right blades are ordered with it.

Grip and Technique

For fine, short cuts, such as opening the skin of a small specimen or separating tissue layers, hold the handle like a pencil, resting the hand on the dissecting tray for steadiness. For longer straight cuts, the handle lies along the palm with the index finger on the back of the blade, like a table knife. Cutting with the belly of the blade rather than the point, and drawing it smoothly rather than pressing, gives cleaner incisions and fewer slips.

Specifications

Length 5 inch (from the title)
Function Reusable handle for detachable scalpel blades
Blade attachment Slotted fitting that locks a matching blade
Pairs with Scalpel blades of the matching fitting pattern
Handle pattern number and material Confirm at enquiry

Typical Uses

  • Dissection practicals on plant and animal specimens
  • Trimming and sectioning specimens before mounting
  • Opening seeds, fruits and flowers to study their structure
  • Fine cutting of thin card or film when building physics models

Care & Handling

  • Fit and remove blades with forceps or a blade remover, never with bare fingers.
  • Put used blades straight into a sharps container.
  • Wash the handle after each session, dry it fully, and sterilise it according to the laboratory routine.
  • Store handles without blades attached, in a tray or case.

Why Choose LabEquip

Biology and general science departments buy scalpel handles for student dissecting kits and keep a few spares, ordering blades separately. LabEquip lists this handle among its physics equipment, with scalpel blades and the longer 5.4 inch handle, and blade patterns can be confirmed through the contact page.

Frequently Asked Questions

Which blades fit a scalpel handle?

Blades must match the handle’s fitting pattern. The No. 3 pattern takes smaller blades such as 10, 11, 12 and 15, and the No. 4 pattern takes larger blades from 20 to 24. Confirm the pattern of this handle when ordering blades.

How do I fit a blade safely?

Hold the blade with forceps or a needle holder, align its slot with the handle fitting and slide it on until it clicks into place. Keep the sharp edge pointing away from you throughout.

How should a used blade be removed?

Grip the heel of the blade with forceps, lift it slightly off the fitting and slide it forward off the handle, or use a blade remover. Drop it straight into a sharps container.

Can the handle be autoclaved?

Reusable metal handles, which are usually stainless steel, are normally autoclavable. Confirm the material of this handle, clean it before sterilising and let it dry fully afterwards.

What grip should students use?

A pencil grip suits short, fine cuts, with the hand resting on the tray. A table-knife grip, with the index finger on the back of the blade, suits longer straight cuts.

Why use a detachable-blade scalpel rather than a fixed one?

Blades can be replaced the moment they dull, so cuts stay clean and less force is needed, which also makes slips less likely. Only the inexpensive blade is discarded, not the whole tool.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)