Quick Answer: The Torsion Pendulum (Bridge Type) is a torsion pendulum whose wire hangs from the crosspiece of a frame, the bridge, rather than from a wall bracket or a separate stand. A disc on the lower end of the wire twists in angular simple harmonic motion, and the bridge type torsion pendulum is used to find the modulus of rigidity of the wire.
The Bridge Frame and What It Allows
In the usual bridge pattern, two uprights on a heavy base carry a crosspiece, and the upper chuck for the wire is fixed to the middle of that crosspiece. The disc hangs inside the frame, protected from knocks and from the drafts that disturb a pendulum hung from a wall bracket. The frame also makes the apparatus self-contained, so it can be set up on any bench without a wall fixing.
A rigid support matters more than it might seem. If the support twists or sways slightly, it takes part in the oscillation, and the period no longer depends on the wire alone. A closed frame, braced at both ends, resists that movement. Levelling the base lets the wire hang along the centre line of the frame, so the disc turns without touching the uprights.
The bridge type suits a graphical method. Clamping the wire at different points changes its free length l, and since T² = 8πIl/(ηr⁴), a graph of T² against l is a straight line through the origin. Its gradient, 8πI/(ηr⁴), gives η, and using a line rather than a single reading averages out the timing errors at each length.
Specifications
| Type | Torsion pendulum with the wire suspended from a bridge frame |
| Frame | Crosspiece carried on uprights over a base, as the bridge pattern implies |
| Motion | Torsional oscillation of a disc about the vertical wire |
| Method | T² plotted against wire length l; gradient gives η |
| Frame height, chucks, disc and wires supplied | Confirm at enquiry |
Experiments on the Bridge Frame
- Determining the modulus of rigidity from a graph of period squared against wire length
- Comparing wires of different metals or diameters on the same frame
- Measuring the moment of inertia of a second body by adding it to the disc
- Demonstrating angular simple harmonic motion in rotation lessons
Care & Handling
- Level the base of the bridge type torsion pendulum before use, so the wire hangs centrally and the disc clears the uprights.
- When changing the wire length, loosen and retighten the chuck with the disc supported, so its weight does not jerk the wire.
- Keep the frame away from fans and open windows; even inside the bridge, strong drafts upset the reference mark.
- Coil spare wires loosely on a card and label them with metal and diameter.
Why Choose LabEquip
College laboratories that run torsion experiments every term often prefer the bridge type, because it stands on its own and keeps the disc protected. For a simpler set-up, the standard torsion pendulum is also listed in LabEquip’s physics lab equipment. Ask about frame and wire options on the contact page.
Frequently Asked Questions
What does bridge type mean for a torsion pendulum?
It describes the support: the wire hangs from a crosspiece carried on uprights, forming a bridge over the disc, instead of from a wall bracket or a single clamp stand. The frame gives a rigid, free-standing support.
Why plot T squared against wire length?
The period squared is proportional to the length of wire between the chucks. A graph of T² against l should be a straight line through the origin, and using its gradient to calculate the modulus of rigidity averages out errors in individual readings.
Why does the support need to be rigid?
If the support twists or sways, it stores and returns some energy and changes the period. A braced frame stays still, so the measured period depends only on the wire and the disc.
How is the free length of the wire measured?
Measure from the point where the wire leaves the upper chuck to where it enters the lower chuck on the disc, using a metre rule. Do not include the length gripped inside the chucks, which does not twist.
Can the pendulum find the moment of inertia of another body?
Yes. Time the disc alone, then with the body placed centrally on it. Combined with a body of known inertia, the changes in period give the unknown moment of inertia without needing the wire’s rigidity.
How can the counting of oscillations be made reliable?
Fix a vertical pointer or mark just beside the disc and count transits past it in the same direction. Start counting from zero as the stopwatch starts, and time at least twenty full oscillations.
Last Updated: October 2026










Reviews
There are no reviews yet.