Quick Answer: The Metal Cubes are solid cubes of metal used in density and relative-density experiments: measuring a cube’s edge gives its volume, weighing it gives its mass, and the ratio identifies the material. Sets of different metals cut to the same size show at a glance that equal volumes can have very different masses.
Density from a Caliper and a Balance
A cube is the easiest solid for a first density measurement, because its volume is simply the edge length cubed. Students measure each edge with a vernier caliper, average the three, cube the result and divide the mass from a balance by that volume. Comparing the answer with a table of densities identifies the metal, and repeating with each cube in the set shows how widely metals differ.
When cubes of different metals share the same dimensions, holding one in each hand makes the idea of density physical before any numbers are written: an aluminium cube feels light and a copper one much heavier, though they take up exactly the same space. A second check on volume comes from displacement: lowering a cube into a measuring cylinder of water raises the level by its volume, or an overflow can collects the displaced water for measurement.
Metal cubes also serve in upthrust experiments, where the loss of weight in water equals the weight of water displaced, and in simple comparisons of how quickly different metals warm. The metals, edge length and number of cubes in this set are not stated in the title, so the exact combination should be confirmed. The companion metal cylinders suit the same experiments where a cylindrical shape is wanted.
Specifications
| Form | Solid metal cubes |
| Main use | Density and relative-density determination |
| Volume | Edge length cubed |
| Measured with | Vernier caliper and balance |
| Metals, edge length and number of cubes | Confirm at enquiry |
Experiments
- Finding the density of a metal from its mass and measured dimensions
- Identifying unknown metals by comparing measured density with reference values
- Showing that equal volumes of different metals have different masses
- Checking a calculated volume against water displacement in a measuring cylinder
Care & Handling
- Weigh the cubes dry, since water on the surface adds mass.
- Measure each edge in more than one place, as edges may not be perfectly equal.
- Dry the cubes after displacement work to prevent tarnish, or rust on iron.
- If any cube is lead, handle it with care and wash hands afterwards.
- Keep each set in its own box so that cubes of different sizes are not mixed.
Why Choose LabEquip
Science teachers buy metal cubes because they make density tangible from the first lesson and then serve several later practicals. Find them in our Physics Equipments and contact LabEquip for the metals and sizes available.
Frequently Asked Questions
How do I find the density of a metal cube?
Measure the edge length, cube it to get the volume, weigh the cube to get its mass, then divide mass by volume. Use consistent units, for example grams and cubic centimetres.
Why use cubes of the same size made of different metals?
With volume held the same, any difference in mass comes from the material alone. Students can feel and measure that some metals are much denser than others.
How can the volume be checked without a caliper?
Lower the cube gently into a measuring cylinder partly filled with water and note the rise in level. The rise equals the cube’s volume, provided it is fully submerged.
What is relative density?
It is the density of a material divided by the density of water. Since water has a density of about one gram per cubic centimetre, relative density has nearly the same number as the density in those units, but no unit.
Can the cubes be used for upthrust experiments?
Yes. Weigh a cube in air and then fully submerged in water. The loss in weight equals the weight of water it displaces, which gives the cube’s volume and verifies Archimedes’ principle.
Why do my density results differ slightly from book values?
Small errors in measuring the edges are multiplied when cubed, and alloys such as brass vary in composition. Measuring carefully and averaging several readings brings results close to reference values.
Last Updated: October 2026










Reviews
There are no reviews yet.