Search

In Stock

Rheostat, Nichrome Wire, Groove Type

Precision-Engineered Spiral Grooves: Features a high-grade insulating porcelain mandrel with machine-cut spiral grooves that lock the wire in place, preventing turns from touching or overlapping even during significant thermal expansion.

Industrial-Grade Sliding Contact: Equipped with a heavy-duty, spring-loaded brass slider and oxidation-resistant guide rods to maintain continuous electrical contact while allowing for fine-tuned linear adjustments of ohmic values across the range.

₹1,680.00

Quick Answer: The Rheostat, Nichrome Wire, Groove Type is a sliding-contact variable resistor in which nichrome resistance wire is wound into a helical groove on an insulating former, so each turn stays separated and fixed in place. This nichrome wire rheostat controls current and acts as a potential divider in laboratory circuits.

The Groove and the Wire

Bare resistance wire wound on a smooth tube can creep along it with use, and turns that touch their neighbours short out part of the winding. A groove cut into the former locates every turn: the turns stay evenly spaced, the slider passes over them consistently, and the resistance per turn stays uniform along the whole length. That is what groove type means in this listing.

Nichrome, an alloy of nickel and chromium, has a high resistivity, so a useful resistance fits into a compact winding, and it forms a protective oxide layer that lets it run hot without burning out. The same properties make it the usual element in electric heaters. In a rheostat, it means the winding copes with the heating that comes with larger currents. Its resistance does rise somewhat as it heats, more than that of constantan.

For settings that must stay steady while the wire warms, the constantan (Eureka) wire rheostat is the companion choice. The resistance, current rating and former material of this rheostat are not given in the listing title.

Applications in Circuits

  • Dimming a lamp or controlling a small motor in series with a low-voltage supply
  • Supplying a variable voltage as a potential divider for I-V characteristic practicals
  • Controlling the current through an electromagnet or solenoid
  • Providing a variable load when testing cells and power supplies

Specifications

Type Sliding-contact rheostat, groove type
Resistance wire Nichrome (nickel-chromium) alloy, as titled
Winding Wire laid in a helical groove on an insulating former
Use Current control or potential divider
Resistance, current rating and former material Confirm at enquiry

Care & Handling

  • Begin with the full winding in circuit and reduce the resistance step by step.
  • Never exceed the current rating; an overloaded winding may glow and the slider contact can pit.
  • Check before use that no turn has lifted out of its groove, which upsets the slider contact.
  • Store it dry and protected from knocks that could dent the winding.

Why Choose LabEquip

Teachers buy groove type nichrome rheostats for general current control on every electricity bench, where a robust winding matters more than a perfectly stable value. LabEquip lists it in Physics Equipments; ask about resistance and current ratings through our contact page.

Frequently Asked Questions

What does groove type mean in a rheostat?

The resistance wire sits in a spiral groove cut into the former. The groove keeps every turn evenly spaced and stops turns sliding together and shorting, so the resistance changes smoothly as the slider moves.

Why is nichrome used for resistance wire?

It has a high resistivity and resists oxidation at high temperature, so a compact winding gives a useful resistance and can run warm without damage. The same alloy is used in electric heater elements.

Does the resistance of a nichrome rheostat change as it heats?

Yes, it rises a little with temperature, more than constantan does. For most current-control tasks this does not matter, but for steady reference currents a constantan rheostat holds its setting better.

Can the rheostat be used to dim a lamp?

Yes. Connected in series with a lamp and a low-voltage supply, moving the slider changes the current and so the brightness. It is a common first demonstration of variable resistance.

What happens if the current rating is exceeded?

The wire overheats and may glow, the former can be damaged, and the slider contact can pit or stick. Always check the expected current against the rating and start from the maximum resistance setting.

How should the slider contact be looked after?

Keep it clean and dry and check that it presses firmly on the winding. A weak or dirty contact gives jumpy readings and sparks, which wear both the contact and the wire.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)